 ifonTalk 常見問題 數碼電話盒設定 Sipura SPA-2100 |
 |
|
|
 簡介 |
Inexpensive, easy-to-install and simple-to-use, the SPA-2100 connects standard telephones and fax machines to IP-based data networks. IP telephony service providers and enterprise users can offer traditional and enhanced communication services via the customers’ broadband connection to the Internet or Local Area Network (LAN).
|
|
|
| 撥號方式 |
Dialing to United States or Canada : 1+ area code + phone number (For example : 15107654321)
Dialing to World Wide : 011+ country code + city code + phone number (For example : 011862187654321) |
|
|
| 一般設定 |
Discover IP address of SPA-2100 :
Pickup phone set, dial **** first then press 110 + #.
Logon into SPA-2100 through http://ip address:8080/. After logon on, click "Voice" tab from default page(show as below) |
 |
|
| After change to Admin page (see as below), click Line 1 Tab from top menu bar. |
 |
|
| From Basic view (show as below), modify some parameter as follow. |
 |
1. |
Line Enable : Modify to Yes. |
2. |
SIP Port : 5060 |
3. |
Proxy : 216.123.152.5 or other address as SIP Agent address from register confirmation e-mail |
4. |
Register : Modify to Yes. |
5. |
Make/Ans Call Without Reg. : Both modify to No. |
6. |
Register Expires : Modify to 3600. |
7. |
Display Name : Same as register confirmation e-mail. This name will show on destination endpoint. |
8. |
User ID : Same as Local ID from register confirmation e-mail. |
9. |
Auth ID : Same as Authentication ID from register confirmation e-mail. |
10. |
Password : Same as password from register confirmation e-mail. |
11. |
Use Auth ID : Modify to Yes. |
|
|
Click (switch to Advance view) tab on top menu bar then click Line1.
Scroll down to the bottom to modify dial plan.
Add (|1xxxxxxxxxxS0|999xxxxxxxxxxS0|011xxxxxxxxxxxxx) into the Dial Plan window(show as below).
Use this dial plan can decrease dialing time |
 |
|
| Modify Preferred Codec to G729a in Audio Configuration(show as below). Modify Silence Supp Enable to No. Modify Use Pref Codec Only to No. |
 |
|
| After modified all of the required information. Click Save Settings button to save it then re-boot your CPG box. |
 |
|
|
| 常見問題 |
|
為什麼我的電話拿起來，還沒有開始撥號，很快就會聽到Busy的訊號? |
| |
這是 SPA-2100 盒子的設定問題，盒子的出廠值設定為3秒後如果沒有按入任何的數字，就會送出Busy Signal。如果您的 SPA-2100 寬頻電話盒並沒有接受您硬體服務廠商的 Provisioning 控管。您可以自行更改這個設定。
設定方式如下，先利用網頁介面登入您的 SPA-2100 (請詢問您的硬體購買廠商相關的登入資訊)，進入 Advance Setting，進入 Regional，更改 Control Timer Values 下面的 Interdigit Short Timer，將原來的 3 秒改成您可以接受的時間，我們的建議值為 7 秒。 |
 |
|
為什麼我撥完國際電話後要等很久才會撥通? |
| |
這是 SPA-2100 盒子的設定問題，盒子的出廠值設定為號碼輸入完 10 秒後，才會開始撥號。如果您想要加速撥號的時間，可以在每次撥完號後加上一個 ＃ 鍵，盒子就會馬上撥出。如果您希望更改盒子內的設定，請確認您有相關的豋入資訊。
設定方式如下，先利用網頁介面登入您的 SPA-2100，進入 Advance Setting，進入 Regional，更改Control Timer Values 下面的 Interdigit Long Timer，將原來的 10 秒改成您可以接受的時間，我們的建議值為 5 秒。(請不要設太短，會造成號碼未輸入完，盒子就開始撥打電話)。 |
|
|
| |
| |
